What are the functions and components of the tractor gearbox? Tractor gearbox is usually composed of gearbox, transmission mechanism (gear, shaft and bearing), control mechanism (shift lever, s...
What are the components of the hydraulic suspension system?What is the function? The tractor hydraulic suspension system is used to connect the hanging or semi-hanging agricultural implements, ...
What problems should be paid attention to when using and maintaining the hydraulic suspension system? In order to ensure the reliability and durability of the tractor hydraulic suspension system in op...
Poor heat dissipation performance of radiator The radiator is the cooling device of the cooling system. It should be ensured that there is enough heat dissipation area against the wind. After the engi...
Why choose a belt drive over a chain drive? The function of belt drive and chain drive is very similar. However, what are the advantages of belt drive over chain drive? Reduce maintenance requi...
The Cylinder Head Engine hood and sealing cylinder parts Components of engine cover and sealing cylinder (including water jacket, valve and cooling fin) are the installation basis of valve mech...
Cause analysis of cylinder sleeve wear The working environment of cylinder liner is very bad, and there are many reasons for wear. Under normal circumstances, due to construction reasons, normal wear ...
What safety technical items should be checked before the tractor is delivered? (1)The engine has good starting performance, stable idle speed, smooth acceleration, no abnormal noise, no oil leakage, w...
What are the requirements for tractor starting operation (1)After the engine is started, it should idle at medium speed, preheat the engine first, check the operation and instrument readings, and star...
What should be paid attention to when the tractor changes speed? (1)When shifting, the clutch pedal should be pressed to the bottom, so that the clutch can be completely separated before shifting, so ...
What is the reason why the engine valve is not closed tightly? The following are the reasons for the untight valve closing: 1.The valve clearance is too small. The valve clearance must be adjus...
