How many power take-off shafts are there? What are their characteristics? Tractor power take-off The tractor outputs part of the power to drive the working mechanism of supporting agricultural ...
What is the valve clearance?What is the harm of being too big or too small? Valve clearance: When the valve is fully closed, the clearance between the end of the valve stem and the parts of the valve ...
What are the basic structures of freight cars? The truck generally consists of engine, chassis, body, electrical equipment and other basic structures. Truck is a kind of automobile. Truck is mainly a ...
Diesel generator radiator fan type The function of diesel generator radiator fan is to increase the air flow through the radiator core and improve the heat dissipation capacity. Radiator fans are gene...
Poor heat dissipation performance of radiator The radiator is the cooling device of the cooling system. It should be ensured that there is enough heat dissipation area against the wind. After the engi...
Maintenance Points Of Pulley Radiator 1.During disassembly and assembly, pay special attention to water leakage caused by collision. The installation position must meet the requirements of the origina...
All different types of belts in a typical engine The belt is a simple component, but it plays an important role in the operation of the engine. In short, the belt provides power for a component...
Why choose a belt drive over a chain drive? The function of belt drive and chain drive is very similar. However, what are the advantages of belt drive over chain drive? Reduce maintenance requi...
Timing belt material and structure The timing belt has two main components, one is a rope molded inside it to carry torque load, and the other is a plastic compound used to form teeth and cover the ro...
The Cylinder Head Engine hood and sealing cylinder parts Components of engine cover and sealing cylinder (including water jacket, valve and cooling fin) are the installation basis of valve mech...
Cylinder head structure function 1.Working conditions and requirements of cylinder head The cylinder head bears the mechanical load caused by gas force and cylinder head bolt tightening. At the same t...
Cause analysis of cylinder sleeve wear The working environment of cylinder liner is very bad, and there are many reasons for wear. Under normal circumstances, due to construction reasons, normal wear ...
