Symptoms of oil filter damage and failure
Bad Engine Performance:
Unlike engine operation when the oil filter is in good condition, the level of engine performance will decrease significantly. One will notice that it is difficult for the engine to accelerate as normally. The accelerator will act as if it is not working properly. If any of these symptoms occur, serum care should be taken, otherwise the main components of the vehicle will be damaged.
Sputtering:
The splash in the vehicle is related to the blockage of the oil filter. This happens when the oil filter cannot release the oil at the speed it should, which will cause the car to not keep up with the speed you deserve. Sputtering can cause even greater problems.
Metallic Sounds:
A faulty oil filter will cause the engine to run out of oil. When this happens, the metals will rub against each other. A metallic noise occurs when the engine is running, indicating that there is a problem with the oil flow. Users who experience this sound should ensure that it is repaired as soon as possible before the vehicle suffers more damage.
Dropping Pressure:
The oil pressure gauge can be read from the vehicle dashboard to ensure that the pressure does not drop. It is found that the sharp drop of oil pressure is a problem that must be checked. Naturally, the engine oil pressure will not drop more than one percent during driving. Therefore, severe pressure change is a sign of oil flow error.
Dirty Exhaust:
Plugged oil filter will cause black or dirty exhaust gas from the car. When the engine oil enters the exhaust pipe, the user will often smell the smell of engine oil burning. This is a sign of a bad filter and needs to be replaced as soon as possible before causing more damage.
In a word, we have seen the importance of oil filter in the engine, one of which is oil cleaning. We also ignored more functions, and we explained the components and types of full flow and bypass oil filters. We also checked the symptoms of oil filter damage and failure.
