What are the common faults of the tractor rear axle and steering system? Common faults of rear axle: abnormal noise of transmission; Rear axle oil leakage; Steering clutch slipping; Eccentric wear of ...
Causes and maintenance of engine failure to start The reason why the engine cannot start is as follows: 1.The low pressure oil circuit is blocked, the pipeline is loose and leaks oil, the high p...
What is the reason why the engine valve is not closed tightly? The following are the reasons for the untight valve closing: 1.The valve clearance is too small. The valve clearance must be adjus...
What is the reason for unstable engine speed? What about the solution? Usually, this is caused by the leakage of the intake system and valves, excessive scaling of the throttle valve and intake pipe, ...
What are the common faults of automobile brake system? 1.Fault phenomenon: the pedal does not rise when the brake pedal is pressed, and there is no resistance; Judge the reason: check whether the brak...
Causes of diesel engine starting difficulty From the working principle of the engine, it can be seen that the fuel system should regularly and quantitatively inject fuel into the cylinder, and ensure ...
What is the reason for the insufficient power of the diesel engine? How to solve it? 1.Faulty injector Injector faults are generally divided into mechanical faults and wiring faults. Mechanical...
What is the bearing and its structural classification Bearing is an important part of modern mechanical equipment. Its main function is to support the mechanical rotating body, reduce the frict...
Bearing action Its function should be support, which is literally used to support the axis, but this is only part of its function. The essence of support is to bear radial load. It can also be underst...
Function of clutch Make sure the vehicle starts smoothly This is the main function of the clutch. It is natural to start the engine before the car starts. When the car starts, it accelerates gradually...
What are the causes of clutch slip and how to eliminate them The causes and troubleshooting of clutch slipping are as follows: Phenomenon: When the car starts, completely release the clutch pedal, and...
Working Principle of Remote Radiator Cooling If the geneset is installed below the plane, due to the space limitation, it is recommended to use the remote radiator to cool the engineing. In the ...
