Long-term non-maintenance damage The diesel generator needs regular maintenance. What damage will be caused if it cannot be maintained regularly? 1.Battery: If the battery is not protected for ...
Diesel generator radiator fan type The function of diesel generator radiator fan is to increase the air flow through the radiator core and improve the heat dissipation capacity. Radiator fans are gene...
Poor heat dissipation performance of radiator The radiator is the cooling device of the cooling system. It should be ensured that there is enough heat dissipation area against the wind. After the engi...
Maintenance Points Of Pulley Radiator 1.During disassembly and assembly, pay special attention to water leakage caused by collision. The installation position must meet the requirements of the origina...
All different types of belts in a typical engine The belt is a simple component, but it plays an important role in the operation of the engine. In short, the belt provides power for a component...
Why choose a belt drive over a chain drive? The function of belt drive and chain drive is very similar. However, what are the advantages of belt drive over chain drive? Reduce maintenance requi...
The Cylinder Head Engine hood and sealing cylinder parts Components of engine cover and sealing cylinder (including water jacket, valve and cooling fin) are the installation basis of valve mech...
Cylinder head structure function 1.Working conditions and requirements of cylinder head The cylinder head bears the mechanical load caused by gas force and cylinder head bolt tightening. At the same t...
Cause analysis of cylinder sleeve wear The working environment of cylinder liner is very bad, and there are many reasons for wear. Under normal circumstances, due to construction reasons, normal wear ...
Type of common cylinder gasket Common cylinder gaskets include asbestos (non asbestos) rubber composite gasket, metal clad (copper clad iron clad) gasket, composite coating gasket, metal composite gas...
What are the requirements for tractor starting operation (1)After the engine is started, it should idle at medium speed, preheat the engine first, check the operation and instrument readings, and star...
What should be paid attention to when the tractor changes speed? (1)When shifting, the clutch pedal should be pressed to the bottom, so that the clutch can be completely separated before shifting, so ...
