Poor heat dissipation performance of radiator The radiator is the cooling device of the cooling system. It should be ensured that there is enough heat dissipation area against the wind. After the engi...
Why choose a belt drive over a chain drive? The function of belt drive and chain drive is very similar. However, what are the advantages of belt drive over chain drive? Reduce maintenance requi...
The Cylinder Head Engine hood and sealing cylinder parts Components of engine cover and sealing cylinder (including water jacket, valve and cooling fin) are the installation basis of valve mech...
Cause analysis of cylinder sleeve wear The working environment of cylinder liner is very bad, and there are many reasons for wear. Under normal circumstances, due to construction reasons, normal wear ...
What are the requirements for tractor starting operation (1)After the engine is started, it should idle at medium speed, preheat the engine first, check the operation and instrument readings, and star...
What should be paid attention to when the tractor changes speed? (1)When shifting, the clutch pedal should be pressed to the bottom, so that the clutch can be completely separated before shifting, so ...
What is the reason why the engine valve is not closed tightly? The following are the reasons for the untight valve closing: 1.The valve clearance is too small. The valve clearance must be adjus...
What is the reason for unstable engine speed? What about the solution? Usually, this is caused by the leakage of the intake system and valves, excessive scaling of the throttle valve and intake pipe, ...
What is the reason for the insufficient power of the diesel engine? How to solve it? 1.Faulty injector Injector faults are generally divided into mechanical faults and wiring faults. Mechanical...
What is the bearing and its structural classification Bearing is an important part of modern mechanical equipment. Its main function is to support the mechanical rotating body, reduce the frict...
Function of clutch Make sure the vehicle starts smoothly This is the main function of the clutch. It is natural to start the engine before the car starts. When the car starts, it accelerates gradually...
What are the causes of clutch slip and how to eliminate them The causes and troubleshooting of clutch slipping are as follows: Phenomenon: When the car starts, completely release the clutch pedal, and...
